HPT-6 Pressure transmitters are widely used in petroleum, chemical, power, environmental protection, water treatment, automation equipment and other monitoring pressure, shows the pressure in the field of process control. Most of miniaturized devices to meet the volume requirements. Lightweight, easy to install, you can have a variety of interfaces and signal output for selection. Is a relatively common pressure measurement device. Can be applied to the liquid pressure measurement automation equipment, gas and other non-corrosive to steel 316L media. Can also be customized according to customer requirements made of polyethylene products or special materials do embalmed HPT-6 physical characteristics of compact structure of the output signal of the applicability of a variety of optional (voltage / current) with a ceramic core and diffused silicon core may selected interface can be used to automate a wide range of equipment to do pressure or level measurements be customized. HPT-6 performance parameters Range: -0.1 ~ 250MPa pressure form: gauge pressure, absolute pressure output signal mA: accuracy of a variety of output 4 ~ 20mA two-wire, etc. (% FS): 0.1 0.25 0.5 nonlinear (% FS): ≤0.1 ≤0.25 ≤0.5 hysteresis (% FS): ≤0.1 ≤0.25 ≤0.5 Repeatability (% FS): ≤0.1 ≤0.25 ≤0.5 zero drift (% FS / ℃): ≤0.02 full-scale drift (% FS ) ≤0.02 stability: (% FS / Year): ≤0.25 operating voltage (V): 12 ~ 36V DC (Standard: 24V) Temperature (℃): -20 ~ 85 ℃ overload (%): 300 Life: > 9 million pressure cycles load resistance (Ω): ≤750 Response Time (ms): ≤1 Measuring media: Compatible with a variety of media diaphragm material 316L 316L or ceramic diaphragm pressure shell material 1Cr18Ni9Ti interface: M20 * 1.5 , G1 / 2, G1 / 4,1 / 4NPT or custom protection: IP65 Weight: 80g